Sta-Rite TX 135 Pool Filter Compatible

The discontinued Sta Rite TX 135 pool filter is replaced by this compatible FC-2560 pool filter, which fits the Sta Rite stainless steel tank only. This Filbur FC-2560 pool filter will replace TX 135 Sta Rite Pool Filters, as well as the following pool filters: Unicel UHD-SR135, Pleatco PSR 135 (PSR-135), OEM Sta-Rite WC108-59S2X (WC10859S2X) and Harmsco H-SR135 (HSR135). TX 135 Sta Rite Filter Compatible (Filbur FC2560) Specs: Length: 34 1/2"" Diameter: 8 11/16"" Top: 4 3/16"" Open (Blue Cap) Bottom: 4 3/16"" Open (Orange Cap) Square Feet: 135 Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally-bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. Cleaning your Filbur Pool and Spa Filters It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.