1 to 3 of 3 products for
Otc U-joint Tool
view: list | grid
Similar Searches:
otc stinger tool, otc tool, otc scan tool, otc tool kit 3797m07, otc clutch align tool, otc readiness monitor tool, otc automotive tool, otc brake adjuting tool, otc quick disconnect tool, otc removal tool set, otc tool kit 3774, otc tool set 7057, otc puller spx corporation, otc bearing cup installer, otc service tool set, banding tool cutter, joint spanner wrench, otc socket 2-9 64, otc socket 1-59 64, joint service set, 4wd
All Categories > Automotive > Parts & Tools
-
Tools (OTC7057) U-Joint Remover Tool Set # 7057Also known as: OTC-7057, OTC7057; Features and Benefits: Works on 16N, 17N, 18N and 1710 series U-joints and spicer 1600-1610 to 1180 series U-joints Includes plastic storage box, No 1036 2-jaw puller and instructions Weight: 16 lbs., 3 oz The service tool removes even the most rusted and corroded bearings easily and mechanically, without damage to costly U-joint components, even where the space is limited. It applies up to 7 tons of force to separate the yoke assemblies and remove bearings the right way ...Read MoreIn Stock
-
5190 Heavy-Duty Universal Joint Puller Spx Corporation/otcAlso known as: OTC-5190, OTC5190; The ideal tool for disassembling drivelines... May be used with up to a one-inch impact wrench.Quickly and easily removes sealed U-joint cups without the need for hammering or heat.Will not damage the driveshaft, yoke, bearing cups, or joints. Fits practically all Class 7 and 8 trucks, including: Spicer drivelines 1610, 1710, 1760, 1810, 1880 Spicer SPL 140, 170, and 250 Life Series Meritor 16N, 17N, 18N, 1710 Meritor RPL 20 and 25 Permalube Series # OTC5190Read MoreDetails on 5190 Heavy-Duty Universal Joint Puller Spx Corporation/otc
In Stock
-
5192 Heavy-Duty Bearing Cup Installer - Series 1610 to 1880 Spx Corporation/otcAlso known as: OTC-5192, OTC5192; Quickly and easily installs bearing cups on boltretained universal joints. Fits series 1610 to 1880 and nearly all other heavy-duty truck and machine type u-joints with bolt-retained bearing cups. Automatically aligns bearing cups during installation. Eliminates the possibility of damage to the needle bearing. # OTC5192Read MoreDetails on 5192 Heavy-Duty Bearing Cup Installer - Series 1610 to 1880 Spx Corporation/otc
In Stock
$74.95
$44.81 -
Tools (OTC7249) Ball Joint Installer / Remover # 7249
Also known as: OTC-7249, OTC7249; Features and Benefits: Contains: 3 receiver tubes Installation and removing adapters: 1 installing cup, 1 receiving cup, 1 installing adapter Weight: 15 lbs., 3 oz.Removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins. # OTC7249Read MoreDetails on Tools (OTC7249) Ball Joint Installer / Remover # 7249
In Stock
$149.94
$85.99 -
Tools (OTC4623) CV Joint Banding Tool and Cutter # 4623Also known as: OTC-4623, OTC4623; Features and Benefits: Use to install and tighten the "band-it" or strap style clamps on CV joint boots, or on power steering rack and pinion steering gear bootsOnce installed into the tool, tighten the band by turning the handle on the tool; use a socket or wrench on the handle to torque the band to OE specifications. When the boot clamp has been tightened to specs, cut the band to the correct length by flipping the lever forward. # OTC4623Read MoreDetails on Tools (OTC4623) CV Joint Banding Tool and Cutter # 4623
In Stock
$19.03
$11.34 -
Tools (OTC7080) 1" Drive Ball Joint Spanner Wrench # 7080Also known as: OTC-7080, OTC7080; Features and Benefits: Tool permits easy torquing with 1" socket for proper upper ball-joint preload Weight: 8 ozDesigned for removal and installation of ball joint adjusting sleeves on 1/2, 3/4 and 1 ton Dana open yoke front axles found on Ford, GM, Chrysler, International and Jeep 4WD vehicles. # OTC7080Read MoreDetails on Tools (OTC7080) 1" Drive Ball Joint Spanner Wrench # 7080
In Stock
$26.95
$19.49 -
Tools (OTC8034) Chrysler 2-9/64" Large Ball Joint Socket # 8034Also known as: OTC8034; Features and Benefits: Socket is 2” Long The drive size is 3/4" Fits 2-9/64” ball joints Similar to Miller Tools No. C-3561This tool is made to remove or install the screw in type ball joints, used on Chrysler or Dodge light trucks and vans. # OTC8034Read MoreDetails on Tools (OTC8034) Chrysler 2-9/64" Large Ball Joint Socket # 8034
In Stock
-
Tools (OTC8033) Chrysler 1-59/64" Small Ball Joint Socket # 8033Also known as: OTC8033; Features and Benefits: Similar to Miller Tools No. C-3560 Socket is 2” long with a 3/4” drive Fits 1-59/64” ball jointsRemoves and installs the screw-in type ball joints used on mid-size, rear-wheel drive Chrysler cars. # OTC8033Read MoreDetails on Tools (OTC8033) Chrysler 1-59/64" Small Ball Joint Socket # 8033
In Stock
-
OTC (OTC7996) Honda Lower Ball Joint Service SetUsed with OTC 7249 ball joint service set to remove/install both sizes of ball joints on 1983-1997 Honda Accord, Civic, del Sol and Prelude. 4 piece set.Read MoreIn Stock
$153.34
$83.99 -
Tools (OTC7920) GM 4 WD Ball Joint Adapter Set # 7920Also known as: OTC-7920, OTC7920; Features and Benefits: Use this set with your No. 7249 ball joint service tool set to service GM’s 1996 and newer 4WD 1/2- and 3/4-ton pickups, Suburban, and Yukon Tahoe Weight: 2 lbs, 3 oz.Easily remove or install either after- market or original equipment press-fit lower ball joints. # OTC7920Read MoreDetails on Tools (OTC7920) GM 4 WD Ball Joint Adapter Set # 7920
In Stock
$92.95
$61.56 -
Tools (OTC7509) CV Joint Inner Puller Complete Set # 7509Also known as: OTC-7509, OTC7509; Features and Benefits: This tool pulls C.V. joints on 1986-current Taurus/Sable. Will also pull other joints having hidden retaining rings. Pry bars can damage expensive aluminum transmission cases, and attempting to do the job by pulling on the axis can damage the roller bearing inside the C.V. joint. With this puller, the axle assembly is popped out of the transaxle without damage, thanks to the straight, even pull provided by the slide hammer.Tool is available with fork ...Read MoreDetails on Tools (OTC7509) CV Joint Inner Puller Complete Set # 7509
In Stock
-
OTC 7704 4WD Ball Joint Service Kit for Dana44Four Wheel Ball Joint Service Kit This kit is used with ball joint service kit No. 7249 to remove and install upper and lower ball joints on 1967-current 1/2- and 3/4-ton 4WD vehicles having the Dana 44 front axle (found on Ford, GM, Dodge, IHC, and Jeep vehicles). Wt., 2 lbs., 5 oz.Read MoreIn Stock
$122.83
$71.99 -
Tools (OTC6731) Ford Ball Joint Adapter Update Kit # 6731Also known as: OTC-6731, OTC6731; Features and Benefits Use with an OTC ball joint press to remove and install upper and lower ball joints in various Ford vehicles Includes 1 installing cup Includes 2 receiving cups Works with Ford Trucks, Excursions, Expeditions, Explorers, and Rangers Made of sturdy steel constructionThree piece kit contains specialty ball joint adapters for use with the industry standard OTC 7248 C-Frame. The OTC6731 is designed to work with the following Ford vehicles: Ford F-150 ...Read MoreDetails on Tools (OTC6731) Ford Ball Joint Adapter Update Kit # 6731
In Stock
$85.95
$60.10 -
Tools (OTC6732) GM Ball Joint Adapter Update Kit # 6732Also known as: OTC-6732, OTC6732; Features and Benefits Made of sturdy steel construction Designed for use with the industry standard OTC 7248 C-Frame Updates the OTC 6530 Master Ball Joint Kit to include GM light trucks and SUV’s For use on 1995-2004 GM light trucks and SUV’s Allows installation of ball joints on late model GM productsFour piece kit designed to be used with the industry standard OTC 7248 C-Frame and contains specialty ball joint adapters to fit the following GM vehicles ...Read MoreDetails on Tools (OTC6732) GM Ball Joint Adapter Update Kit # 6732
In Stock
$85.95
$50.77 -
Tools (OTC7894) Dodge Ram / Jeep Ball Joint Service Adapter Kit # 7894Also known as: OTC-7894, OTC7894; Features and Benefits: Use with the No. 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints, and the offset ball joints used to change caster/ camber. Works on: 1984-newer "downsized" Jeep Wagoneer and 2WD and 4WD Cherokee and Comanche; 1987-newer Jeep Wrangler; 1990-newer Jeep Renegade; 1993-newer Jeep Grand Cherokee; 1994-newer Dodge Ram 1/2-ton 4WD pickup Wt., 3 lbs. # OTC7894Read MoreDetails on Tools (OTC7894) Dodge Ram / Jeep Ball Joint Service Adapter Kit # 7894
In Stock
$114.95
$76.99 -
Tools (OTC29505) Ball Joint Receiver Tool 2in. OD 1-3/4in. ID # 29505Also known as: OTC-29505, OTC29505; Features and Benefits: 2" outside diameter, 1-3/4" inside diameter. # OTC29505Read MoreDetails on Tools (OTC29505) Ball Joint Receiver Tool 2in. OD 1-3/4in. ID # 29505
In Stock
$5.58
$4.43 -
-
Tools (OTC72493PK) Ball Joint Service Tool Set- 3 Pack # 7249-3PKBall Joint Service Tool Set- 3 Pack # OTC72493PKIn Stock
-
Epi U JointEpi U Joint. Grease zerks on most. Meets or exceeds OEM quality. Available for front wheel shaft or front final drive shaft.Read MoreDetails on Epi U Joint
In Stock
$33.95
$29.99 -
85810 U-Joint GirdlesU-Joint Girdles 65-82 GM 12 Bolt w/Straps; Red Anodized; 1 Set Per Pack;In Stock
Additional items that match your search
sponsored links
| search suggestions: | ||
|---|---|---|
Shopping Blog | About Become | Send Feedback | Share Your Success Story | Online Degrees | Exava | Black Friday Deals
Our International Sites: Japan | United Kingdom | Germany | Italy
Copyright © 2009 Become, Inc.
if yer hewmen, dawnt qlique dis linc