1 to 20 of 54 products for
Similar Searches:
All Categories > Home & Garden > Home Improvement > Security
-
Linear MegaCode MDRG 1-Channel Gate ReceiverThe MegaCode series of digital receivers are wireless radio controls designed for use with automatic gate openers. The MegaCode radio format provides unparalleled security. The transmitter and receiver can be programmed to more than a million different codes. MegaCode receivers and transmitters do not contain a typical “coding switch”. Each transmitter is pre-set at the factory to a unique code. The receiver is programmed by sending a signal to it from the transmitters(s) that are going to be used ...Read MoreDetails on Linear MegaCode MDRG 1-Channel Gate Receiver
In Stock
-
Linear MGR 1 Channel Gate Receiver-- Replaces MegaCode MDRG for Gate Operators -- For use with systems where a remote antenna is needed -- 318 Mhz -- 40 transmitter capacity -- Auto voltage sensing - no jumpers to set -- Power: 12 - 30 VAC or 10.5 - 30VDCRead MoreDetails on Linear MGR 1 Channel Gate Receiver
In Stock
-
Linear MultiCode 109920 1-Channel Gate ReceiverThe Model 109920 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. If the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing, an external Model 106603 Remote Whip Antenna should be used. The receiver includes a 24-volt AC power transformer that plugs directly into a 115 VAC power outlet. The normally open relay ...Read MoreIn Stock
-
Linear Delta 2-channel Receiver for Commercial Gate and Door Access ControlThe Delta-3 DR-2 2-channel Receiver is a two-channel wireless radio control designed for use with automatic garage/gate operators and access control systems. The receiver can be activated by any of the Delta-3 format transmitters. Features Activates two devices Wire lead antenna 12 and 24 Volt models Mounting bracket supplied Power: 24 Vac/Vdc Frequency: 310 MHz Codes: 128 (set by dip switches) Dimensions: 5.5 x 1.25 x 4 inchesRead MoreDetails on Linear Delta 2-channel Receiver for Commercial Gate and Door Access Control
In Stock
-
Linear MGR-2 2 Channel Gate Receiver-- For Gate Operators -- For use with systems where a remote antenna is needed -- 318 Mhz -- 40 transmitter capacity -- Auto voltage sensing - no jumpers to set -- Power: 12 - 30 VAC or 10.5 - 30VDCRead MoreDetails on Linear MGR-2 2 Channel Gate Receiver
In Stock
-
Linear MultiCode 109950 1-Channel Gate ReceiverThe Model 109950 1-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used ...Read MoreIn Stock
-
Linear MultiCode 302850 2-Channel Gate ReceiverThe Model 302850 2-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used ...Read MoreIn Stock
-
Linear MegaCode MDR 1-Channel ReceiverThe MegaCode series of digital receivers are wireless radio controls designed for use with automatic garage door and gate openers. The MegaCode radio format provides unparalleled security. The transmitter and receiver can be programmed to more than a million different codes. MegaCode receivers and transmitters do not contain a typical “coding switch”. Each transmitter is pre-set at the factory to a unique code. The receiver is programmed by sending a signal to it from the transmitters(s) that are ...Read MoreDetails on Linear MegaCode MDR 1-Channel Receiver
In Stock
-
Linear GRD-2 2-Channel ReceiverRead MoreLocks
The GRD-2 is a 2-channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The GRD-2 can operate two gates, one gate and an obstacle sensor, or channel one can open the gate and channel two can close the gate. The receiver uses the Delta-3 radio format, with 256 possible codes for each channel, set by dipswitch. The GRD-2 is an auto sensing, Delta 3 format gate receiver which eliminates any chance of damage to either the gate operator or itself from ...Details on Linear GRD-2 2-Channel Receiver
In Stock
-
Linear MegaCode MGR 1-Channel ReceiverThe MGR is a 1-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The receiver uses the MegaCode radio format with over a million possible code combinations. Up to 40 transmitters can be programmed into the receiver.Read MoreDetails on Linear MegaCode MGR 1-Channel Receiver
In Stock
-
Linear GRD 1- Channel ReceiverThe GRD is a 1-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The receiver uses the Delta-3 radio format, with 256 possible codes, set by dipswitch. The GRD is an auto sensing, Delta 3 format gate receiver which eliminates any chance of damage to either the gate operator or itself from running off the wrong voltage.Read MoreDetails on Linear GRD 1- Channel Receiver
In Stock
-
Linear Delta 3 DRA 1-channel 12-volt Receiver for commercial gate and door ...The Delta-3 DRA 1-channel 12-volt Receiver is a small economical unit designed for commercial gate and door access control. It is compatible with solid state control boards. Upon receipt of a properly coded signal from a transmitter, it provides a switch operation for both NO and NC circuits. Any Delta-3 transmitter may be coded to activate this receiver, and any number of transmitters may be used to operate this receiver. In addition, the DRA may be programmed to respond to one of 256 digital codes. Features ...Read MoreDetails on Linear Delta 3 DRA 1-channel 12-volt Receiver for commercial gate and door access control
In Stock
-
Linear Delta3 DR4 4-Channel ReceiverThe Delta-3 DR-4 4-channel Receiver is a four-channel wireless radio control designed for use with automatic garage/gate operators and access control systems. The receiver can be activated by any of the Delta-3 format transmitters. Single and multi-channel transmitters and receivers can be mixed and matched within product families to address just about any user need.Read MoreDetails on Linear Delta3 DR4 4-Channel Receiver
In Stock
-
Linear Delta3 DRA 1-Channel ReceiverThe Delta-3 Model DRA 1-Channel 12-volt Receiver is a small economical unit designed for commercial gate and door access control. It is compatible with solid state control boards. Upon receipt of a properly coded signal from a transmitter, it provides a switch operation for both NO and NC circuits. Any Delta-3 transmitter may be coded to activate this receiver, and any number of transmitters may be used to operate this receiver. In addition, the DRA may be programmed to respond to one of 256 digital codes.Read MoreDetails on Linear Delta3 DRA 1-Channel Receiver
In Stock
-
Linear MegaCode MDR-2 2-Channel ReceiverThe MegaCode series of digital receivers are wireless radio controls designed for use with automatic garage door and gate openers. The MegaCode radio format provides unparalleled security. The transmitter and receiver can be programmed to more than a million different codes. MegaCode receivers and transmitters do not contain a typical “coding switch”. Each transmitter is pre-set at the factory to a unique code. The receiver is programmed by sending a signal to it from the transmitters(s) that are ...Read MoreDetails on Linear MegaCode MDR-2 2-Channel Receiver
In Stock
-
Linear Delta3 DR 1-Channel ReceiverThe Delta-3 Model DR 1-Channel 24-volt Receiver is a small economical unit designed for commercial gate and door access control. It is compatible with solid state control boards. Upon receipt of a properly coded signal from a transmitter, it provides a switch operation for both NO and NC circuits. Any Delta-3 transmitter may be coded to activate this receiver, and any number of transmitters may be used to operate this receiver. In addition, the DRA may be programmed to respond to one of 256 digital codes.Read MoreDetails on Linear Delta3 DR 1-Channel Receiver
In Stock
-
Linear Delta3 DRA4 4-Channel ReceiverThe Delta-3 DR-4A 4-channel Receiver is a four-channel wireless radio control designed for use with automatic garage/gate operators and access control systems. The receiver can be activated by any of the Delta-3 format transmitters. Single and multi-channel transmitters and receivers can be mixed and matched within product families to address just about any user need.Read MoreDetails on Linear Delta3 DRA4 4-Channel Receiver
In Stock
-
Linear MegaCode MGR-2 2-Channel ReceiverRead MoreLocks
The MGR-2 is a 2-Channel Gate Receiver designed for use with automatic gate operators or systems where a remote antenna is needed. The receiver uses the MegaCode radio format with over a million possible code combinations. Up to 40 transmitters can be programmed into the receiver. The MGR-2 is an auto sensing, MegaCode format gate receiver which eliminates any chance of damage to either the gate operator or itself from running off the wrong voltage. The MGR-2 comes with two relays. It will operate two gates ...Details on Linear MegaCode MGR-2 2-Channel Receiver
In Stock
-
Linear MultiCode 309013 1-Channel ReceiverThe Model 309013 1-Channel Receiver is designed for use in residential garage door operator applications. Typically the receiver mounts directly to the three terminals on the door operator. An 11-inch wire antenna extends from the receiver. The operator supplies 24-volt power to the receiver, or the receiver can be powered by a separate 24-volt AC power transformer. Remote power accessories available for the Model 309013 include the Model 109201 Wiring Harness and the Model 109207 Wiring Harness. Both models ...Read MoreDetails on Linear MultiCode 309013 1-Channel Receiver
In Stock
-
Linear Delta 3 DRM 1-channel 12-volt Receiver for Commercial Gate and Door ...24-volt, single-channel, three-terminal Delta-3 recessed replacement receiver, 256 selectable codes, fits into operator bulkheadRead MoreDetails on Linear Delta 3 DRM 1-channel 12-volt Receiver for Commercial Gate and Door Access Control
In Stock
sponsored links
Buying GuidePopular Searches
| search suggestions: | ||
|---|---|---|
Shopping Blog | About Become | Send Feedback | Share Your Success Story | Online Degrees | Exava
Our International Sites: Japan | United Kingdom | Germany | Italy
Copyright © 2009 Become, Inc.
if yer hewmen, dawnt qlique dis linc