Similar Searches:
kd tools 13 piece sae, kd tools sae, head gearwrench set, gearwrench 8, gearwrench reversible wrench set, gearwrench combination set 9304, gearwrench 4, gearwrench stubby sae set, gearwrench 68 pc sae, 13-piece, gearwrench 13piece, gearwrench 2, gearwrench tap die set, kd tools sae set, gearwrench flex socket set, kd tools die set, kd tools tool kit, gearwrench flex ratcheting wrench
See matches for kd tools sae set in these categories
1 to 20 of 58 products for
Kd Tools Sae Set
view: list | grid
Did you mean: kd tools sale set ?
-
K-D Tools (KD 9701) 8 Piece SAE Flex Head GearWrench Set
The Flex Head tilts 180 degrees at any interval with continuous head tension so you can reach the tightest places. Flex head is built with spring washers that will keep the head tight even after years of use. The patented GearWrench{R} Ratcheting Wrench needs as little as 5 degrees of movement to turn a fastener. SurfaceDrive{R} box end virtually eliminates the rounding of fasteners. Lifetime Manufacturer's Warranty Contains: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"Read MoreDetails on K-D Tools (KD 9701) 8 Piece SAE Flex Head GearWrench Set
In Stock
-
(KD 80550) 57 Piece 3/8" Drive 6 Point SAE/Metric Socket Set # 80550Read MoreSteel
Also known as: KD 80550, KD80550, KDT-80550, KDT80550; Features and Benefits Ratchet features low profile head for greater access Ratchet features flush mounted reversing lever for greater access Set includes a second ratchet for more versatility and added value Full range of 3/8" drive sockets - complete coverage with no missing sizes Includes 3/8" Universal Joint - for added value57 Piece 3/8" Drive 6 Point SAE/Metric Socket Set includes 1/4" - 1" Standard and 1/4" - 7/8" ...Details on (KD 80550) 57 Piece 3/8" Drive 6 Point SAE/Metric Socket Set # 80550
In Stock
-
Gear Wrench 85399 4 Piece SAE Reversible S Wrench SetRead MoreStoring - Wrenches
Also known as: KD 85399, KD85399, KDT-85399, KDT85399; Features and Benefits: Reversible levers on both ends to allow direction change from either side No need to remove the wrench from the fastener to tighten or loosen Two double reversing 5 degree ratcheting headsThis 4 piece set includes 3/8" x 7/16"; 1/2" x 9/16" ; 5/8" x 11/16" ; 3/4" x 7/8", all packaged in a blow molded case. # KD 85399Details on Gear Wrench 85399 4 Piece SAE Reversible S Wrench Set
In Stock
-
KD Tools (KD 9304) 4 Piece SAE Combination GearWrench Set # 9304Also known as: KD 9304, KDT-9304, KDT9304; Features and Benefits:Sizes: 3/8" - 9/16" # KD 9304Read MoreDetails on KD Tools (KD 9304) 4 Piece SAE Combination GearWrench Set # 9304
In Stock
-
(KD 80300) 51 Piece 1/4" Drive 6 Point SAE/Metric Socket Set # 80300Read MoreSteel
Also known as: KD 80300, KD80300, KDT-80300, KDT80300; Features and Benefits Ratchet features low profile head for greater access Ratchet features flush mounted reversing lever for greater access Set includes a second ratchet for more versatility and added value Full range of 1/4" drive sockets - complete coverage with no missing sizes Includes 1/4" Universal Joint for added value51 Piece 1/4" Drive 6 Point SAE/Metric Socket Set includes 3/16" - 9/16" Standard and Deep Sockets ...Details on (KD 80300) 51 Piece 1/4" Drive 6 Point SAE/Metric Socket Set # 80300
In Stock
-
7 Pc. Stubby SAE GearWrench SetIncludes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4" Stubby combination GearWrench in a molded package tray. 72 tooth ratchet - Only 5{degrees} swing to move fastener Fully polished SurfaceDrive{R} box end Lifetime Manufacturer's WarrantyRead MoreDetails on 7 Pc. Stubby SAE GearWrench Set
In Stock
-
(KD 83000) 68 pc. SAE/METRIC 6 & 12 pt. Socket Set 1/4" & 3/8" ...Also known as: KD 83000, KDT-83000, KDT83000; Kit Includes: 6 Pt. Deep SAE Socket 1/4" Dr.: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2" 6 Pt. Deep Metric Socket 1/4" Dr.: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm 6 Pt. Deep SAE Socket 3/8" Dr.: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16" 12 Pt. Std. Metric Socket 3/8" Dr.: 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 ...Read MoreDetails on (KD 83000) 68 pc. SAE/METRIC 6 & 12 pt. Socket Set 1/4" & 3/8" Dr. # 83000
In Stock
-
K-D Tools (KD 9312) 13-Piece SAE Combination GearWrench{R} Set !Includes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16" and 1" Standard Length Combination GearWrenches and a molded wrench rack. 72 tooth ratchet - Only 5{degrees} swing to move fastener Fully polished SurfaceDrive{R} box end Lifetime Manufacturer's WarrantyRead MoreDetails on K-D Tools (KD 9312) 13-Piece SAE Combination GearWrench{R} Set !
In Stock
-
Gear Wrench 85199 13Piece SAE XL Ratcheting Wrench SetRead MoreWrenches
Also known as: KD 85199, KD85199, KDT-85199, KDT85199; Features and Benefits: Surface drive plus provides stronger grip on fasteners nearly eliminating fastener rounding Oval shaped beam provides improved comfort Ratcheting box end needs as little as 5 degrees to move the fastener Thin head shank design allows for work in tight spaces GrearWrench products are warranted for life to be free of defects in material and workmanshipThe XL ratcheting set is 25 percent longer, to access the hard to reach fasteners ...Details on Gear Wrench 85199 13Piece SAE XL Ratcheting Wrench Set
In Stock
-
(KD 80721) 7 Piece 1/2" Drive SAE Hex Bit Socket Set # 80721Read MoreSteel
Also known as: KD 80721, KDT-80721, KDT80721; Features and Benefits Patented bit holding system forces bit surface to opposing side for maximum retention Chrome sockets; heat treated for durability and service ability S2 and Alloy steel bits Packaged in patented impact resistant "Slide Rail" System for ease in socket storage7 Piece SAE Hex Bit Socket Set includes 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", and 3/4" Bit Sockets packaged on a clip rail. # KD 80721Details on (KD 80721) 7 Piece 1/2" Drive SAE Hex Bit Socket Set # 80721
In Stock
-
(KD 80323) 10 Piece 1/4" Drive SAE Hex Bit Socket Set # 80323Read MoreSteel
Also known as: KD 80323, KDT80323; Features and Benefits Patented bit holding system forces bit surface to opposing side for maximum bit retention - strength Packaged in patented impact resistant "slide rail" system Heat treated socket bases for durability and service ability Chrome sockets; S2 and alloy steel bits Includes 1/16" - 1/4" Bit Sockets 10 Piece 1/4" SAE Hex Bit Socket Set includes: 1/16" - 1/4" Bit Sockets packaged on a clip rail. # KD 80323Details on (KD 80323) 10 Piece 1/4" Drive SAE Hex Bit Socket Set # 80323
In Stock
-
(KD 80303) 10 Piece 1/4" Drive 6 Point SAE Socket Set # 80303Read MoreSteel
Also known as: KD 80303, KDT-80303, KDT80303; Features and Benefits Shallow broach to standard nut depth Rings at base provide quick SAE identification Turn down at base of socket provides grip surface to pull sockets off ratchets Large hard stamped part number and size on both sides of socket for easier visibility to socket size Packaged in patented slide rail for easier positioning of sockets - internal slide rail eliminates interference / ball bearing retention10 Piece 1/4" Drive 6 Point SAE Socket Set ...Details on (KD 80303) 10 Piece 1/4" Drive 6 Point SAE Socket Set # 80303
In Stock
-
(KD 3885) 40 pc. GearWrench 40 Tap and Die Set - SAE # 3885Read MoreSteel
Accommodates Taps and Dies from #4 - 1/2 Carbon steel Tap Holders tilt down for easy access keeping taps secure and organized Set Includes: 3881 Tap and Die Ratcheting T Wrench; 3882 Small Tap Adapter; 3883 Medium Tap Adapter; 3884 Die Adapter; Sliding T for adapters; 17 taps; 17 dies; Thread gauge; #5 screwdriver KD 3885Details on (KD 3885) 40 pc. GearWrench 40 Tap and Die Set - SAE # 3885
In Stock
-
KD Tools 9840 4 Piece Half Moon Reversible GearWrench SAE SetAlso known as: KD 9840, KD9840, KDT-9840, KDT9840; Features and Benefits: Eliminates the problem of reaching around obstructions Features 2 double reversing 5 degree ratcheting heads Each box end features a reversing lever on both sides of the wrench that allows direction changes from either side Allows the fastener to be moved as little as 5 degrees in both directions without removing the wrenchSizes include: 3/8" x 7/16", 1/2" x 9/16", 5/8" x 11/16", and 3/4" x 7/8" ...Read MoreDetails on KD Tools 9840 4 Piece Half Moon Reversible GearWrench SAE Set
In Stock
-
(KD 80564) 7 pc. SAE 6 Pt. Flex Socket Set - 3/8 Drive # 80564Also known as: KD 80564, KDT-80564, KDT80564; Set Includes: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 # KD 80564Read MoreDetails on (KD 80564) 7 pc. SAE 6 Pt. Flex Socket Set - 3/8 Drive # 80564
In Stock
-
82812 Large SAE and Metric Ratcheting Tap and Die Set - 114-Pc KD ToolsThe most innovative addition to taps and die tools in decades. Ratcheting T-handle provide unmatched productivity and versatility. Includes sizes 3-18mm and 4-40 to 3/4 . Set includes: 82800 large ratcheting andldquo;Tandrdquo; wrench, 82801 large lockingRead MoreDetails on 82812 Large SAE and Metric Ratcheting Tap and Die Set - 114-Pc KD Tools
In Stock
-
41880 Double/Bubble Flaring Tool Kit KD ToolsPrecisely flares tubing up to 0. 040 wall thickness to SAE/Metric 45 degree flares. Hardened bar assembly clamps 11 tubing sizes: 3/16 , 1/4 , 5/16 , 3/8 , 7/16 , 5/8 , 1/2 , 4. 7, 6, 8, and 10mm. Do not use on stainless steel tubing Set contains: SAE Bar Assembly, Metric Bar Assembly, Yoke Assembly, Reamer Cutter, 3/16 Flaring Tool Adapter, 7/16 Flaring Tool Adapter, 1/2 Flaring Tool Adapter, 5/8 Flaring Tool Adapter, 4. 7, 6, 8, and 10mm Flaring Tool Adapter. Features: Complete Double and Bubble flaring tool ...Read MoreIn Stock
-
(KD 80574) 7 Piece 3/8" Drive SAE Long Ball Hex Bit Socket Set # 80574Read MoreSteel
Also known as: KD 80574, KDT80574; Features and Benefits Patented bit holding system forces bit surface to opposing side for maximum bit retention - strength Packaged in patented impact resistant "slide rail" system Heat treated socket bases for durability and service ability Chrome sockets; S2 and alloy steel bits Includes 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", and 3/8" Bit Sockets7 Piece 3/8" Drive SAE Long Ball Hex Bit Socket Set includes: 1/8" ...Details on (KD 80574) 7 Piece 3/8" Drive SAE Long Ball Hex Bit Socket Set # 80574
In Stock
-
Gear Wrench 9570 7 Piece SAE Stubby Flex Ratcheting WrenchAlso known as: KD 9570, KD9570, KDT-9570, KDT9570; Features and Benefits: Flex head tilts up to 180 degrees at any interval Surface drive provides a stronger grip on fasteners nearly eliminating rounding Ratcheting box end needs as little as 5 degrees to move a fastener Set includes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16" and 3/4" GrearWrench products are warranted for life to be free of defects in material and workmanshipThis gear wrench set is very unique because it needs ...Read MoreDetails on Gear Wrench 9570 7 Piece SAE Stubby Flex Ratcheting Wrench
In Stock
-
82812 Large SAE and Metric Ratcheting Tap and Die Set - 114-Pc KD ToolsThe most innovative addition to taps and die tools in decades. Ratcheting T-handle provide unmatched productivity and versatility. Includes sizes 3-18mm and 4-40 to 3/4 . Set includes: 82800 large ratcheting andldquo;Tandrdquo; wrench, 82801 large lockingRead MoreDetails on 82812 Large SAE and Metric Ratcheting Tap and Die Set - 114-Pc KD Tools
In Stock
sponsored links
Popular Searches
| search suggestions: | ||
|---|---|---|
Shopping Blog | About Become | Send Feedback | Share Your Success Story | Online Degrees | Exava | Black Friday Deals
Our International Sites: Japan | United Kingdom | Germany | Italy
Copyright © 2009 Become, Inc.
if yer hewmen, dawnt qlique dis linc