The following products are limited to brand: Linear (All Products)
-
-
Linear AK-11 Exterior Digital Keypad
The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The relays can be set for ...
Details on Linear AK-11 Exterior Digital Keypad
Read More
-
-
-
-
Linear MultiCode 109020 1-Channel Garage Door Receiver
The Model 109020 1-Channel Receiver is designed for use in residential garage door operator applications. Typically the receiver mounts directly to the three terminals on the door operator. An 11-inch wire antenna extends from the receiver. The operator supplies 24-volt power to the receiver, or the receiver can be powered by a separate 24-volt AC power transformer. Remote power accessories available for the Model 109020 include the Model 109201 Wiring Harness and the Model 109207 Wiring Harness. Both models ...
Details on Linear MultiCode 109020 1-Channel Garage Door Receiver
Read More
-
-
Linear D21A Normally Open Wall-mount Transmitter
The Model D-21A Normally Open Wall-mount Transmitter has a normally open input circuit that operates in conjunction with an externally mounted normally open magnetic or mechanical contact. When the external contact closes, the transmitter automatically transmits a two-second digitally coded signal to a companion standard digital receiver. Pressing the test pushbutton on the front of the transmitter will also cause the transmitter to send a signal. Each transmission causes the red LED indicator on the front of ...
Details on Linear D21A Normally Open Wall-mount Transmitter
Read More
-
Linear MCT-3 3-Channel Transmitter
The MCT-3 MegaCode digital transmitter is a wireless radio control designed for use with automatic garage/gate operators. Each of the three transmitter buttons will send a unique code when pressed. One button can be used to activate the individual's garage door opener, a second button can operate an access gate, a third button can activate an additional garage door operator or most LInear 318 MHz MegaCode Wireless Receivers. MegaCode transmitters and receivers do not contain a typical "coding switch". Each ...
Details on Linear MCT-3 3-Channel Transmitter
Read More
-
Linear RE-1SS
The Model RE-1SS Residential Telephone Entry System is designed for residential or light commercial access control applications. The speakerphone, keypad, radio receiver, and optional video camera are housed in a rugged enclosure that can be mounted to a pedestal or bolted directly to a wall. The diecast keypad keys have bright, easy-to-read graphics and are lit with an overhead light. The two operation buttons; CALL and HELP, are machined for heavy-duty reliability.
Details on Linear RE-1SS
Read More
-
-
Linear RE-2SS Stainless Steel Telephone Entry System
The Model RE-2 Residential Telephone Entry System is designed for residential or light commercial access control applications. The speakerphone, keypad, radio receiver, and optional video camera are housed in a rugged enclosure that can be mounted to a pedestal, or bolted directly to a wall, or flush mounted in a column. The diecast keypad keys have bright, easy-to-read graphics and are lit with an overhead light. The two operation buttons; CALL and HELP, are machined for heavy-duty reliability. Arriving ...
Details on Linear RE-2SS Stainless Steel Telephone Entry System
Read More
-
-
-
-
Linear MultiCode 308913 1-Channel Visor Transmitter
The Model 308913 1-Channel Visor Transmitter is a poratble transmitter designed for automatic door and gate operator applications. This transmitter is a single-channel device, pressing the pushbutton will send a signal to the receiver. The transmitter has a red test/operate indicator and is powered by a 9-volt battery. A visor clip is included. The transmitter is Multi-Code format with one 10-position coding switch providing 1,024 possible codes. The transmitter will only activate receivers set with the same ...
Details on Linear MultiCode 308913 1-Channel Visor Transmitter
Read More
-
-
Linear MDT-1A 1-Channel Transmitter
The Model MDT-1A 1-Channel Visor Transmitter is designed for use with Linear's access control products. The Model MDT-1A is a single-channel device. Pressing either the round button on the transmitter's front, or the small button on the transmitter's top will send the same signal. The top button can be hidden with the top button cover supplied. Also included are lithium batteries with a five-year service life and a visor clip. The transmitter is MegaCode format, which means each transmitter is factory ...
Details on Linear MDT-1A 1-Channel Transmitter
Read More
-
-
Linear MultiCode 308301 2-Channel Key Ring Transmitter
The Model 308301 2-Channel Key Ring Transmitter is a miniature style transmitter designed for automatic door and gate operator applications. This transmitter is a two-channel device. Pressing the left button on the transmitter will send a channel one signal. Pressing the right button on the transmitter will send a channel two signal. The buttons feature raised dimples for easy, or vision-impaired identification. The transmitter has a red test/operate indicator and is powered by a 12-volt battery. A molded-in ...
Details on Linear MultiCode 308301 2-Channel Key Ring Transmitter
Read More