Filbur FC-2397 Rainbow Dynamic 100 Pool Filter

The Filbur FC-2397 Rainbow Dynamic 100 Pool and Spa Filter replaces Unicel part number C-4999 and part number PRB 100. Also known as FC2397, C4999 and 17-2633. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool & Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool & Spa filters. The Filbur FC-2397 product specifications: Length: 13 5/16"" Diameter: 4 15/16"" Top: Open 2 1/8"" Bottom: Open 2 1/8"" 100 square feet The Filbur FC-2397 works with pools, spas, and filters by Pentair Pool Products, Baja Spas, Coast Spas, Phoenician Spas, Rainbow Plastics, Sonoma Spas and others. Original manufacturer part number 17-2633. Cleaning your Filbur Pool and Spa Filters It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.