Filbur FC-1340 Jacuzzi Whirlpool 30 Spa Filter

The Filbur FC-1340 Jacuzzi Whirlpool 30 Pool & Spa Filter replaces Unicel part number C-6300, Pleatco part number PJW 30. Also known as part numbers FC1340, C6300 and 2730000. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool & Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool & Spa filters. The Filbur FC-1340 product specifications: Length: 14 7/8"" Diameter: 6 7/8"" Top: 3 1/2"" Open Bottom: 3 1/2"" Open 30 square feet The Filbur FC-1340 works with hot-tubs, pool, spas and filters made by Jacuzzi Whirlpool Bath, Jacuzzi Whirlpool Spas and other. Original Manufacturer Part number 2730000. Cleaning your Filbur Pool and Spa Filters It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the filter cartridges as these methods can damage the filter media.