Filbur FC-0141 Pool & Spa Filter

The Filbur FC-0141 Pool and Spa Filter replaces Unicel part number 4CH-30 and Pleatco part number PTL 20. Also known part numbers FC0141, 4CH30, PTL20, 1561-14, 74407-98, 6540-4, and 4 5/8 x 11 7/8 TSC. The Filbur Pool and Spa filters are made of Reemay spunbound polyester pleated filter media with thermally bonded polyurethane caps and punched PVC pipe cores ensuring durability and consistent flow. All Filbur Pool & Spa Filters also feature Anti-Microbial technology, or Microban Technology, which prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Microban Technology is becoming an industry standard and is featured in all Filbur Brand Pool & Spa filters. The Filbur FC-0141 product specifications: Length: 11 7/8"" Diameter: 4 5/8"" Top: Handle Bottom: 1 1/2"" Male Pipe Threads 25 square feet The Filbur FC-0141 works with hot-tubs, pools, spas and filters made by Avalon Spas, Blue Pacific, Caribbean Spas, Catalina, Charisma Spas, Continental, Leisure, Dimension One Spas, Dolphin Spas, Down East, Esther Williams, Florida, Whirlpool, Freedom Spas, Jason International, Leisure, Life, Marathon Spas, Quality Spas, Saratoga Spas, Seascape Spas, Spillway, Sundance Spas, Sweetwater Spas, Whirlpool Spas and others. Original Manufacturer Part number 1561-14. Cleaning your Filbur Pool and Spa Filters It is time to clean the filters when you notice a decrease in the pressure from your jets, or when the pressure in your filter tank increases by 8 psi from when the filter was newly installed. In order to clean the filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons water. Thoroughly rinse the cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the filter. DO NOT use a high-p